TAF 2010M - Jointed Lumber Tractor
The Jointed Lumber Tractor - TAF 2010M - The new machine has a PERKINS motor that develops a power of 95 HP, it has many improvements over previous models, reliability in use and user comfort.
Please fill in your details and we will contact you as soon as possible with the answers on your questions.
TAF 2010M technical features:
» TAF 2010M FORSTKNICKSCHLEPPER (German)
| Dimension and masses | |
|---|---|
| Length: | 5.850 mm |
| Width: | 2.500 mm |
| Height: | 2.900 mm |
| Wheel track: | 2.050 mm |
| Wheelbase: | 2.838 mm |
| Ground clearance: | 425 mm |
| Masse without charge: | 7.600 kg |
| Cabin | |
| Folding booth 45˚ , high visibility, ,Ergonomic , Certified ROPS , according 79/622/EEC | |
|
Ventilation system |
|
|
Air seat cushion |
|
| Engine | |
| Type: | Perkins 1104D-44T |
| Power: | 70kW (95 CP) at 2300 rot/min |
| Torque max | 392 Nm at 1400 rot/min |
| Average consumption/ h | 6,58 l/h (tested) |
| Transmision | |
|
Mechanical , with clutch LUK Action by a hydraulic system |
|
| Gearbox: | EATON type , synchronize 5+1 rates |
| Deck gear: | Slip and planetary reduction gear |
| Direction | |
| Semicarriage articulated | |
| Steering angle: | ±40˚ |
| Drive action: | 2 cylinder hydraulic |
| Controller: | with servodirection |
| Winder: | |
| Type 4x4. With 2 deks always connected | |
| Tires | 18,4/15-26 Alliance forestar |
| Brake system: | |
| Service | with drum and 2 brake hanger acted with 2 cylinder pneumatics, on front axle with monocylinder, on rear axle with double cylinder. |
| Parking | Mechanical brake , engage by elastic force of springs staggered on the rear axle. |
| Command | tap hand brake action by a hand lever |
| Articulation | |
| on bearings | |
| Hydraulic System | |
| Force | 4 cylinder hydraulics ф100 mm Gear pump HY3, 32.7 cm3/rot Full pressure, 150 bar Distribuitor with electric command by a joystick , had priority valve (for direction) on it. |
| For Direction | 2 cylinder hydraulics ф63 mm Gear pump 19 cm3/rot Full pressure, 130bar Servo-steering |
| Shield | |
| Redesigned Swiveling rollers | |
| Cable winch | |
| With 2 drums with gear worm reduction , multidisc clutch dry | |
| Brake with Drum and band | cable : ф13 mm , length 70 m |
| Traction force | 2x5000 daN |
|
Electropneumatic control with wire and radiocommand |
|
| Additional data | |
| Max speed: | 35 km/h |
| Extreme temperatures working environment : | -25˚ (winter) +30˚(summer) |
| Maximum slope inclination: | 25˚ |
Please fill in your details and we will contact you as soon as possible with the answers on your questions.
Advantages of using the implements fitted out with PERKINS diesel engine in comparison to those fitted out with classical diesel engine:
- Perkins Engines Company Ltd. is number 1 world-wide in projecting and manufacturing of the diesel engines for applications OFF ROAD (industrial, agricultural and generators) with an experience of 75 years in the field and a distribution network of approximate 4000 dealers and deliverer extended in more than 190 countries in the world;
- Low pollution emission, according to the European and American legislation;
- Low fuel consumption (till 10% in comparison to other engines);
- Low noise level, low oil consumption, cold startability, simplicity, ruggedness, without running-in period;
- Long service period characterised throught minimum of action for repair and long usage period.
Example: for a diesel Perkins engine (80-100 PH) will be obtained the following economy during the whole exploitation period, in comparison to another diesel engine with the same power: 16 oil filter, 16 diesel filter, 136 engine oil filter, 3000 liter diesel. Think about the economy for 2,3, … Perkins engines!
For more details on the Perkins engines and the advantages of using them please contact us or access:
› www.perkins.com